Forex Envy Power Edition (Oleh forex_trader_47717)

Pengguna telah memadamkan sistem ini.

Forex Envy Power Edition Perbincangan

Apr 16, 2012 at 13:11
30,845 Paparan
346 Replies
Ahli sejak Apr 18, 2012   102 hantaran
Apr 19, 2012 at 12:34 (disunting Apr 19, 2012 at 12:40)
Hi Will,

Of course you are right, high leverage to generate a high MC head room is just one effect Envy uses to it's advantage.

As for Team Envy, VERY impressed.

I use these Script to measure a lot of broker stuff, including StopLevel, MC%, and trade to trade time. If Envy needs to close out 13 trades by changing the SL or TP and your broker has a order modify to order modify time of 1.6 seconds, well you be be down a few pips.

Best time trade time I have ever seen is 300 ms or around 3.3 order mods per second. That was on a VPS with a <1 ms Ping time to the server. Worst was around 2 seconds. Then look at the StopLevel and Digits. Some brokers use StopLevel 20 or 40 on 4 digits and others use StopLevel 1 or 2 on 5 digits.


Lampiran:

No ROI in a dead account
Ahli sejak Aug 20, 2011   588 hantaran
Apr 19, 2012 at 12:53
using hard SL & TP, the trade is closed on the server side, no network latency for this.
changing a SL/TP to a specific value (which is away from the minimum for the account) is not impacted by the latency, if you want the SL at a specific price, this could takes 10 seconds to be completed and there is no impact on the target price asked

the performance impacts only the open trade process for this EA, you don't care if its slow, has the EA is not impacted by a specific open price value, the target is 10ips from the price of the trade not from the asked price.

the new version will offer an hidden TP, in this case the execution could be a problem if you have to close 10 trades, this could take 2 to 5 seconds.
Ahli sejak Apr 18, 2012   102 hantaran
Apr 19, 2012 at 13:07 (disunting Apr 19, 2012 at 13:11)
Hi Will,

Sure I agree that a hard SL or TP cost no MT4 time. But most EAs I have seen actively control the SL and/or TP and thus need a high back to back order modify execution speed.

I have just today downloaded Envy so I have no detailed knowledge of the order modification sequence it uses. As an old engineer and IT guy, I would prefer to have a quick order modification time and have a StopLevel of 0 or 1 on a 5 digit broker.

As for the Leverage question, I have modified the Envy Power Excel spreadsheet to allow the Leverage to be altered. Dropping the Leverage from 1000 to 500 doubles the cost of opening each trade. Open a LOT of trades and your MC head room is reduced as can clearly be seen in the chart. At a leverage of 300, I suggest we would have had a MC and at 200 a blown account for sure. I'm happy with leverage of 500 as I can get good high speed and tight spread brokers on an dedicated VPS. I have real concerns about putting real money on a penny broker.

You pay peanuts and you get monkeys.

Lampiran:

No ROI in a dead account
Ahli sejak Aug 20, 2011   588 hantaran
Apr 19, 2012 at 13:56
just follows the team recommandations. if you dont do this, you'll have a real problem.
do not try to play on top of them by changing the size of the account , the leverage or anything. you'll loose your account for sure.

its not just a question of leverage, a leverage of 1000 on a standard account required 10 times more money than a micro account.
and the free margin is not just based on the opened trades, but also the current loss of these trades...
so 13 lot could be 10% of the balance, but 13 lots (+ the 10 other trades) at -100pips reduce your free margin quickly.

a web site like mt4i provide a chart with the hourly floating P/L, so you can see that the free margin could fall below 100% just because the price goes in the wrong direction.
here the link for the small live accpunt:
mt4i.com/users/envy-live-bfr/stats
Ahli sejak Apr 18, 2012   102 hantaran
Apr 19, 2012 at 14:43
Hi Will,

Yes I understand the issue with the free margin chewed up by the open losing trades, I couldn't model that and yes it would be expected to make my cash flow worst and the change of hitting a MC a lot more probable. I made the model to study the effect that Leverage via the cost of opening a trade has on the overall cash flow.

What I learned was there needs to be an cost to the account of 1/5000 the balance to open the smallest Lot size. For a standard account that is 0.01 Lots which cost at 500 Leverage $2. This means I need to invest $10k, have a Leverage of 500 and have opening Lot sizes of 0.01 standard Lots. Correct?

Will, I'm an engineer and I love to take new and smart things apart to figure out how they tick. Trust me though, I'm not one for reinventing the wheel and will be running Envy with standard setting until we get to know each other very well.

Thanks for the link. If I'm reading the data correctly it seems that account almost died.
No ROI in a dead account
Ahli sejak Aug 20, 2011   588 hantaran
Apr 19, 2012 at 14:53
yes, the small account was closed to died... but has not died.
they add few $ in the account to go through the bad move, and the monday they hit the TP, and so they win a big amount.
I got the same trend, expect I was not able to add some money and instaforex removes the bonus, so I got a margin call for the same batch. only 5% was missing in my account to not get the MC...
but my mistake: I got the 30% bonus which can be removed at any time by the broker... and they remove it... :(

well... I allready recovered 50% of the lost in 1 month using the long cycle only... (100% of account increase in march without the rebates, and I'm at 30% in april)
because the account is small now, the risk is increased... (its why I got 100%...)

except this bonus issue, the EA is very stable with constant win.
Ahli sejak Apr 18, 2012   102 hantaran
Apr 19, 2012 at 15:46
Ouch on the Bonus removal. Not nice. Even more reason to trade with your own money. I mean the money they give away and their rebates needs to come from some other customer, so No Free Lunches.

I'm happy to trade with 0.1 to 0.4 pip spreads, pay 0.3 pip / lot / round trip commission, have a StopLevel of 0.1 pip, MC at 1% and trade to trade execution time of 300 ms.
No ROI in a dead account
Ahli sejak Aug 20, 2011   588 hantaran
Apr 19, 2012 at 15:57
which broker is it? :)
Ahli sejak Apr 18, 2012   102 hantaran
Apr 19, 2012 at 16:29
FxCC with special conditions.

May get the RT pip cost down to 0.1 (0.8 charge and 0.7 rebate) if I push through enough Lots from Envy, other EAs I run and my manual trading (use ForexEaSystem's ProFx indicators) which can be over 100 Lots per month. FxCC have very tight spreads and fast execution.

I use AxiTrader via a CNS VPS at the moment but the FxCC rep is working a good deal for me to move. I did a trade time test on their close coupled VPS and got Ping time <1ms and MT4 order modify executes of around 250ms or 4 per second. Fastest I have ever seen.

I also use the real time FxOpen market depth program. Helps to see how the EU market will open on Cable.

Who do you use or would use with serious money on the line?
No ROI in a dead account
Ahli sejak Dec 05, 2011   2 hantaran
Apr 20, 2012 at 08:23
I am sorry i am new to this stuff but look at this ea and can' t understand this, there are two products ? one forex envy and one forex envy power edition ? or it is something you can change from the sets ? thank you
Ahli sejak Apr 18, 2012   102 hantaran
Apr 20, 2012 at 08:49
Hi,

As far as I know, Envy Power is in test and is not yet ready for sale.
No ROI in a dead account
Ahli sejak Feb 15, 2012   202 hantaran
Apr 22, 2012 at 10:55
Hi, if I want to buy FE now, will I get the new 3.0 power?
thanks
Ahli sejak Apr 18, 2012   102 hantaran
Apr 23, 2012 at 10:56
Envy Power still alive? Last reported trade at 03:59 was when AUDUSD dived for the floor after the bad AU CPI data at 04:00. Nothing since then. Envy Trading also stopped updating about 1 hour later. Did we lose them both? Emailed TE but no replies.

BTW my Envy made money on the AUDUSD dive.
No ROI in a dead account
Ahli sejak Feb 23, 2011   34 hantaran
Apr 23, 2012 at 11:06
That's a problem since the account is not constantly updated you do not get a true indication of what is going on with the account - drawdown will only be shown once the orders recover and it is connected again.
 It could also be deleted as the vendor feels the drawdown is not 'correctly calculated'. Heh.
Ahli sejak Apr 18, 2012   102 hantaran
Apr 23, 2012 at 11:13
The Long and Long/Short accounts are being updated. So strange? I did email TE but no replies. They are normally quick to reply. Sure hope the 2 accounts did not die on that AUSUSD dive. Noticed it caused other to have big movements as well and all around the same time. Could be an issue when trading 9 currencies and most move against you.

My Envy has only made 1 trade since the AUSUSD dive. Do TE have the ability to remotely shut down trading? Checked the set files and nothing has changed. I reloaded them from those emailed from TE and still no trades.
No ROI in a dead account
Ahli sejak Aug 20, 2011   588 hantaran
Apr 23, 2012 at 11:32
well... I don't have an audusd issue.
it was eurjpy for me, but I hit the TP during the night.

TE is not able to shutdown the EA remotely.
the new version will offer the capability of automatically activate the stop after TP before a news, but not the V2.1

for sure if all 9 currencies going against you you are dead...
but only 2 is enough, I got a margin call with 2 currencies only going against me. but the problem is related to the short cycle, the long cycle can support this with less issues.

for your no trade issue, did you have any error in the logs?
Ahli sejak Apr 18, 2012   102 hantaran
Apr 23, 2012 at 11:53 (disunting Apr 23, 2012 at 11:57)
No errors and no trades. Manually I did 4 trades and picked up around 180 Pips with a Lot size quite a bit bigger than the 0.01 Envy starter.

The Power and Trading accounts started with a HeadRoom of around 4,500. My account has around 45,000 HeadRoom. What this means to me is I have a massive margin reserve at the expense of ROI. I'm tempted to increase the opening Lot size from 0.01 to say 0.05 and still maintain a HeadRoom of around 9,000 or twice the HeadRoom amount of the Power and Trading accounts.
No ROI in a dead account
Ahli sejak Apr 18, 2012   102 hantaran
Apr 23, 2012 at 11:58
Latest Envy Calculator with a few new features and capabilities such as Bonuses.

Lampiran:

No ROI in a dead account
Ahli sejak Aug 20, 2011   588 hantaran
Apr 23, 2012 at 12:21

   BealBull posted:
   No errors and no trades. Manually I did 4 trades and picked up around 180 Pips with a Lot size quite a bit bigger than the 0.01 Envy starter.

The Power and Trading accounts started with a HeadRoom of around 4,500. My account has around 45,000 HeadRoom. What this means to me is I have a massive margin reserve at the expense of ROI. I'm tempted to increase the opening Lot size from 0.01 to say 0.05 and still maintain a HeadRoom of around 9,000 or twice the HeadRoom amount of the Power and Trading accounts.
well... its not a good idea.

ask the forexenvy team to get the right setup for your account size. they provides the best setup.
with minimal risk, forexenvy can open 15 trades from 0.01 up to 12 lots (so a total of +-30lots for 1 currency only)
so if you have 2 currencies in this scenario, you'll have a minimum of 30 lots opened + the other currencies... this starts to be big...

you cn do some backtesting to see the result of your setup, and see the level of risk generated.
Ahli sejak Apr 18, 2012   102 hantaran
Apr 23, 2012 at 13:05
Back test trading 14 currency pairs? How?
No ROI in a dead account
Daftar Masuk / Daftar to comment
You must be connected to Myfxbook in order to leave a comment
*Penggunaan komersil dan spam tidak akan diterima, dan boleh mengakibatkan penamatan akaun.
Petua: Menyiarkan url gambar/youtube akan menyisipkannya secara automatik dalam siaran hantaran anda!
Tip: Taipkan tanda @ untuk melengkapkan nama pengguna yang menyertai perbincangan ini secara automatik.